Size Guide

Size guide (For Salamander only)

How to measure heel to toe

Measure your feet wearing socks at the end of the day for best results.

1) Step on a piece of paper with your heel slightly touching a wall behind.
2) Mark the end of your longest toe on the paper for both feet (You might need a friend to help you ) and measure from the wall to the marking.

If you are in between sizes:
-For tight fit, go one size down
-For loose fit, go one size up

US Men size

US Female size

EUR

UK

Heel to toe (inch)

Heel to toe (cm)

7

9

40

6.5

10.16

25.8

8

10

41

7

10.42

26.5

9

11

42

8

10.68

27.1

10

12

43

9

10.95

27.8

11

12.5

44

10

11.21

28.5

12

13

45

10.5

11.47

29.1

13

14

46

11

11.73

29.8

14

15

47

12

11.99

30.5

15

16

48

13

12.25

31.1
Navail magnetic shoes use genuine leather for extra durability and comfort. This material will resit normal wear and tear better than most fabrics and will at the same time allow your feet to stay dry and warm. Your magnetic boot also features a Suede tongue to allow moisture to evacuate even better. Nubuck is a naturally strong material that is made out of raw thick leather by scraping the outer surface. Most of the strength of the leather is preserved while a softer texture is provided.

Genuine grade A nubuck leather

Strong and durable

Our grade A nubuck leather provides breathability, flexibility and durability.

Buy now
Two ropes are toed together. This represents the strength and durability of Navail roofing shoes.

Fused on sole

Stronger than glue

The rubber is molded directly on the leather vamp. This provides a bond much stronger than glue.

Buy now
Navail Magnetic shoes feature excellent heat resistance. The magnets in the sole can reach boiling temperature of water.

Heat resistance

212°F (100°C)

Because we know how hot a roof or a truck can get on a sunny day, The Magnetic Boot features heat resistant magnets and rubber.

Buy now
A construction site is full of sharp elements, nails or screws that can pierce or tear appart your shoes. Navail Magnetic Boots meet this challenge with an innovative patented technology that effectively reduces damages caused by cutting elements. A cut on our sole does barely expand so the damage stays local and barely noticeable. The magnets stay localized deep inside the sole. They are anchored to metal plates embedded within the magnetic sole. On top of that, we use an extremely durable rubber.

Cut resistance

Cut resistance

Walk with confidence on your work site, knowing that your Magnetic Boot can withstand a cut or piercing with minimal damage.
Thanks to its patent pending technology, the magnets are bonded to the rubber and strongly held within the sole.

Buy now
A shields protects from an abrasive surface, a cutter and a nail. This represents the resistance of Navail roofing shoes with magnets.

High performance rubber

Longer life time

Our made in the US rubber is not just super grippy, it is also highly resistant to cut, tear and abrasion.

Buy now

Can take a punch!